Release time：2023-11-08 08:11:34 Hits： Current position: Home > News
This article mainly introduces:
Latvia hydraulic cylinder,vehicle hydraulic cylinder manufacturer,vehicle hydraulic cylinder
(Latvia vehicle hydraulic cylinder,produced by Hengyu Hydraulic Co., Ltd）
vehicle hydraulic cylinder are widely used in Latvia，because of no need for deceleration device，long service life，smooth movement.So our company has designed vehicle hydraulic cylinder for customers from Latvia.
The definition of the minimum starting pressure of the vehicle hydraulic cylinder refers to the minimum working pressure of the vehicle hydraulic cylinder in the no-load state, which is a comprehensive index reflecting the manufacturing and assembly accuracy of the vehicle hydraulic cylinder parts and the size of the sealing friction.
When the control pressure of the hydraulic system is too low, the vehicle hydraulic cylinder will appear wrong or no action, because the throttle resistance in the control pipeline may be too large, the flow valve is improperly adjusted, the control pressure is inappropriate, and the pressure source is interfered with. At this time, check the control pressure source to ensure that the pressure is adjusted to the specified value of the system.
The scar on the sliding surface of the vehicle hydraulic cylinder piston will transfer with use. Before the piston is installed, there are scars on its sliding surface, which are installed intact and untreated, and these scars will in turn scratch the inner surface of the vehicle hydraulic cylinder wall. Therefore, before installation, these scars must be fully repaired.
vehicle hydraulic cylinder and hydraulic station selection: Select the type and structure of the vehicle hydraulic cylinder according to the operation requirements of the main engine. According to the external load force borne by the vehicle hydraulic cylinder, such as gravity, friction force of the external mechanism, inertia force and working load, determine the load change law of the vehicle hydraulic cylinder in each stage of the stroke and the power value that must be provided. Determine the diameter of the piston and piston rod according to the working load of the vehicle hydraulic cylinder and the selected oil working pressure. the flow rate of the hydraulic pump is determined according to the movement speed of the vehicle hydraulic cylinder, the diameter of the piston and the piston rod.
What is the bearing capacity of the HOB cylinder?
The normal specification of HOB is 140 kg pressure, which is more commonly used in the market, and there are clear marks on the cylinder, 210 kg is a strengthened version of HOB, generally customized cylinders are also clearly marked on the above, when the specific use of the cylinder, the maximum use pressure is marked on the cylinder.
What is the role of the cylinder on the plastic mold? The oil cylinder plays a great role in the mold, one is that the core distance is very large, or because of the mechanism of the product, only the oil cylinder is reasonable or more cost saving. Let the side core be extracted before opening the mold. Hot runner is mainly based on the product, sometimes customers require to use hot runner, the price is more expensive, but there are many benefits. It can save raw materials and shorten the molding cycle.
Add Wechat