tailplate hydraulic cylinder Sold to Australia

This article mainly introduces:

Australia hydraulic cylinder,tailplate hydraulic cylinder manufacturer,tailplate hydraulic cylinder

(Australia tailplate hydraulic cylinder,produced by Hebei Hengyu company）

tailplate hydraulic cylinder are widely used in Australia，because of no transmission clearance，powerful torque，clever hydraulic energy conversion.So our company has designed tailplate hydraulic cylinder for customers from Australia.

Introduction to tailplate hydraulic cylinder:

The main role of the tailplate hydraulic cylinder: the tailplate hydraulic cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the tailplate hydraulic cylinder realizes reciprocating motion. The structure of the tailplate hydraulic cylinder has three categories: piston tailplate hydraulic cylinder, plunger tailplate hydraulic cylinder, swing tailplate hydraulic cylinder, piston tailplate hydraulic cylinder and plunger tailplate hydraulic cylinder to achieve reciprocating linear motion, output speed and thrust, swing tailplate hydraulic cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the tailplate hydraulic cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The tailplate hydraulic cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

At the rated pressure, the thrust of the tailplate hydraulic cylinder is determined by what factors: at the rated pressure of the oil pump, the work done by the tailplate hydraulic cylinder is related to the diameter of the tailplate hydraulic cylinder, but not to the stroke of the tailplate hydraulic cylinder. Moreover, the larger the tailplate hydraulic cylinder diameter, the larger the area, and the greater the pressure obtained. To this point, we should have a correct understanding and clear understanding, so as to avoid problems in the use of the tailplate hydraulic cylinder.

tailplate hydraulic cylinder piston rod material selection and requirements: ① piston rod is usually made of 45 steel. When there is a large impact force and heavy load transmission, it is made of 40Cr steel. This is to ensure that the piston rod has sufficient working strength. The piston rod is generally designed as a tailplate hydraulic cylinder, if the diameter is larger, the hollow piston rod can be used. Made of No. 45 seamless steel pipe. ③ When the piston rod is manufactured, the blank should be first forged and conditioned after mechanical rough processing, and the hardness of HB=230 ~ 250. The purpose of conditioning is to improve the machining performance and increase the working strength of the material. ④ The surface roughness Ra of the piston rod after finishing should not be greater than 0.65μm. ⑤ In order to improve the corrosion resistance of the piston rod, the working surface of the rod can be plated with hard chromium. ⑥ The piston rod and the end cap are guided by H8 ' tailplate hydraulic cylinder piston rod industry standard: piston rod diameter series of national recommended standard GB/T2348-1993. Piston rod thread size series standard GB/T2350-1980. Please refer to execute. There is no industry standard for piston rods Both the tailplate hydraulic cylinder and the hydraulic motor are devices that convert the pressure energy of the liquid into mechanical energy and output it. The tailplate hydraulic cylinder mainly outputs linear motion and force. The tailplate hydraulic cylinder has a variety of forms, according to the different characteristics of its mechanism it can be divided into piston type, plunger type and swing type three categories, according to the mode of action he can be divided into single action and double action. Piston tailplate hydraulic cylinder, plunger tailplate hydraulic cylinder is mainly used for: machinery, such as excavators; Scientific research, such as university structure laboratory. The plunger tailplate hydraulic cylinder is used for pressure testing machines, such as Jinan test, and the test machine is used for material testing.

The definition of the minimum stable speed refers to the minimum movement speed of the tailplate hydraulic cylinder without crawling phenomenon when the full load is moving, it has no uniform indicator, and the tailplate hydraulic cylinder that undertakes different work has different requirements for the minimum stable speed.

Answers to some questions about tailplate hydraulic cylinder:

Why is a light cylinder less productive than a heavy cylinder at the same oil pressure?
f=ps Under the same pressure, the larger the area, the greater the output, but the maximum pressure can not exceed the system engineering pressure of the cylinder!

How to distinguish large cavity and small cavity of excavator rod cylinder ?
Single rod piston cylinder is a form of cylinder that is used relatively most, and the boom, bucket, dozer shovel cylinder are all in this form. Among them, the rodless cavity is also called the large cavity, and the rodless cavity is also called the small cavity. Therefore, the cylinder cavity on the side with the exposed piston rod is the small cavity, and the cylinder cavity on the side without the exposed rod is the large cavity.