High quality hydraulic equipment manufacturers!
        TELL:+8613184968882

        stern plate hydraulic cylinder Sold to Estonia

        Release time:2023-11-28 10:55:08 Hits:100 Current position: Home > News

        This article mainly introduces:

        Estonia hydraulic cylinder,stern plate hydraulic cylinder manufacturer,stern plate hydraulic cylinder

        Estonia stern plate hydraulic cylinder

        (Estonia stern plate hydraulic cylinder,produced by Hengyu Hydraulic Cylinder Factory)

        stern plate hydraulic cylinder are widely used in Estonia,because of no need for deceleration device,long service life,smooth movement.So our company has designed stern plate hydraulic cylinder for customers from Estonia.

        Introduction to stern plate hydraulic cylinder:

        The difference between the plunger stern plate hydraulic cylinder and the piston stern plate hydraulic cylinder is that the piston in the stern plate hydraulic cylinder is replaced by a shaft plunger, which is used in hydraulic transmission requiring a long mechanical stroke, and can only input pressure oil from one direction, pressurize in a single direction, and form a thrust to push the plunger to move. The return trip of the plunger depends on the plunger itself to fall, and some rely on the spring to push back to the original position. Usually used plunger type stern plate hydraulic cylinder, its inner hole does not need mechanical finishing, as long as the plunger round grinding can be assembled.

        We can not just consider the price and ignore the quality when we purchase the stern plate hydraulic cylinders. Now some manufacturers produce unqualified products in order to reduce costs, the piston rod is not adjusted, the rod coating is not enough, the stern plate hydraulic cylinder finish can not reach, the guide sleeve should use copper, but instead of ductile iron, although the cost is reduced, the quality of the stern plate hydraulic cylinder is not required.

        The difference between the integral stern plate hydraulic cylinder and the split stern plate hydraulic cylinder: The integral stern plate hydraulic cylinder and the split stern plate hydraulic cylinder in the stern plate hydraulic cylinder are two different stern plate hydraulic cylinders, and they are very different. The whole stern plate hydraulic cylinder, which is cast in one body, is not prone to problems such as oil leakage; The split stern plate hydraulic cylinder is welded twice, so if it is not handled well at the welding, it is prone to problems such as oil leakage and stern plate hydraulic cylinder damage. Therefore, it is obvious that the answer to this question is for difference.

        Regular maintenance of the stern plate hydraulic cylinder includes: regular tightening, stern plate hydraulic cylinder fastening screws and gland screws, stern plate hydraulic cylinder piston rod stop adjustment screws, should be tightened once a month, tighten each screw evenly, and achieve the corresponding tightening torque. Replace the seal regularly, it is recommended to replace the seal of the stern plate hydraulic cylinder once a year. Clean regularly, the stern plate hydraulic cylinder is cleaned every other year, and the seals are replaced while cleaning.

        Answers to some questions about stern plate hydraulic cylinder:

        Cylinder la-50-70st What does that mean?
        Full model should be CX-LA-50-70ST, thin block cylinder, radial mounting, bore 50, stroke 70.

        What is the problem that the cylinder stroke is not in place?
        1. Mechanical cause: the piston rod bends; If there is a synchronous cylinder, the stroke of the two cylinders may be different. 2. Hydraulic reason: the system back pressure is too large; The actuator load increases while the system pressure decreases. The electric is not sent, the reversing valve is not reset or stuck, the oil is too dirty, there is gas in the system, the external inertia load is too large, and the cylinder stroke is not in place.

        Back to list Recommended article

        Leave a message if you have any questions.

        Send
        Email

        Email:hsslrubbertech@gmail.com7x24 hours

        Glad to receive your consultation!:

        Service
        Tel

        +8613184968882
        7x24hours service

        Add
        Wechat

        Add Wechat
        TOP
        亚洲人成无码网WWW| 国产成人精品无码免费看| 久久久久亚洲AV无码专区桃色| 日韩中文字幕在线视频| 国产亚洲精品a在线无码| 国内精品无码一区二区三区| 亚洲精品无码专区在线播放| 日韩国产成人无码av毛片| 国产在线拍偷自揄拍无码| 91中文字幕在线观看| 性无码专区| 97久久精品无码一区二区天美| 一区二区三区无码视频免费福利| 欧美人妻aⅴ中文字幕| 无码色AV一二区在线播放| 无码中文字幕av免费放dvd| 精品久久久无码中文字幕天天| 亚洲 无码 在线 专区| 免费A级毛片无码专区| 国产综合无码一区二区辣椒 | 亚洲国产成人片在线观看无码| 91中文字幕yellow字幕网| 曰韩无码AV片免费播放不卡| 大学生无码视频在线观看| 少妇人妻偷人精品无码视频 | 亚洲av无码一区二区三区不卡| 中文字幕高清在线| а√在线中文网新版地址在线 | 无码av不卡一区二区三区| 精品久久久久久无码专区不卡 | 久久久久久无码Av成人影院 | 4hu亚洲人成人无码网www电影首页| 亚洲国产精品成人精品无码区在线| 韩日美无码精品无码| 中文字幕av无码一区二区三区电影 | 在线高清无码A.| 亚洲大尺度无码专区尤物| 亚洲国产AV无码专区亚洲AV| 无码视频在线观看| 国产精品亚洲а∨无码播放| 日韩欧国产精品一区综合无码|